Fisher & Paykel RS2474S3RH - PRODUCT AND CAVITY DIMENSIONS; Product Dimensions; Cavity Dimensions

9
RS2474S3RH1 Refrigerator with Stainless Steel Panels RD2474R, Handle Kit AHD5RDS74
and Stainless Steel Toe Kick Panel AKRS2304
Left hand hinge is a mirrored version of the image shown. Left hand hinge can be
achieved using supplied parts. Please refer to Installation Guide for details.
RS2474FLJ1 Freezer with Stainless Steel Panels RD2474L, Handle Kit AHD5RDS74 &
Stainless Steel Toe Kick Panel AKRS204
Product Dimensions
in
mm
a Overall height of product
74
1880
B Overall width of product
2 5/16
592
C Overall depth of product (excl. front door panels)
22 1/16
579
D Height from top of door panel to floor
7  7/8
1877
E Minimum cabinetry clearance from side of door panel
5/2
4
F Minimum cabinetry clearance from top of door panel
1/8

G Height of door panel
6 9 7/8
1775
H Depth of door panel
/4
19
I Height from floor to bottom of door panel
4
102
J Depth of toe kick (excl. front door and toe kick panels)
2–4
50–100
Cavity Dimensions
in
mm
K Overall height of cavity
74
1880
L Overall width of cavity
2 5/8
600
M Minimum overall depth of cavity:
• When services are located outside of cavity (shallow)
• When services are located in the cabinet above the cavity
• When services are located at rear of cavity (deep)
2 5/8
24
25 9/16
600
610
650
Note: Product shown installed on the floor. Slide into cabinetry position. Alternatively can
be installed on a plinth. Adjust your cavity height accordingly.
Dimensions may vary by ±1/16’’ (2mm)
L
M
E
F
C
A
G
L
K
FRONT VIEW
M
PROFILE VIEW
DATUM: FRONT OF CHASSIS
I
D
H
J
FLOOR
B
PLAN VIEW
DATUM:
FRONT OF CHASSIS
579
1880
592
INDICATES CAVITY CLEARANCES
INDICATES PRODUCT DATUM
VERTICAL GAP
CLEARANCE FROM SIDE
OF DOOR PANEL
5/2"
PRODUCT AND CAVITY DIMENSIONS