Fisher & Paykel RS36A80J - Custom Door Panel Design Guidelines

14
7 CUSTOM DOOR PANEL DIMENSIONS
H
D
A
B
D
g
A
E
I
F
C
g
H
D
A
B
D
g
A
E
I
F
C
g
RS36A80J
PANEL DIMENSIONS inches (mm)
A
Height of top door panel min.45⁄–max.49⁄” (min. 1150–max. 1252)
B
Width of top door panel 17¾” (451)
C
Gap between top door panels ⁄” (4)
D
Height of bottom drawer panel* 28⁄ – 30⁄” (722 – 772)
E
Height from bottom of product to top of bottom
drawerpanel
34⁄” (874)
F
Width of bottom drawer panel 35⅓” (906)
G
Gap between top door panels and bottom drawer panel ⁄” (4)
H
Height of toe kick panel* 4 – 6” (101 – 152)
I
Maximum depth of custom panels ¾” (19)
Maximum weight of an individual top door panel** 22 pounds (10kg)
Maximum weight of bottom drawer panel** 24¼ pounds (11kg)
Custom door panels, toe kick and handles to be manufactured and fitted by cabinetmaker.
* The bottom grille can be reduced to allow for a higher toe kick. Adjust the height of the bottom drawer panel accordingly.
** Includes weight of handle.
RS36A80J model shown only.
When designing custom door panels, these are only available for non-Water
dispensing models.
ISO VIEW
Note: top trim supplied for
84” (2134 mm) installation
PROFILE VIEW