1
FOLLOW THE INSTALLATION SEQUENCE RELEVANT TO YOUR CABINETRY
FRAMED CABINETRY
(refer to the flip side of the booklet)
!1 CONNECT TO WATER AND ELECTRICAL SUPPLY
!2 LEVEL YOUR PRODUCT
!3 TEMPORARILY FIXING PRODUCT AND ATTACHING DOOR STUDS
!4 INSTALL WATER FILTER CARTRIDGE AND KICKSTRIPS
!0 ATTACH SIDE BASE BRACKETS AND INSTALLATION AIDERS
!5 ASSEMBLE DOOR PANEL SET
!6 HANGING ICE & WATER DOOR PANEL
!7 HANGING NON-WATER DISPENSING DOOR PANELS
!8 ATTACH FIXING BRACKETS
!9 ATTACH COVERS AND TOE KICK
@1 ATTACH SIDE TRIMS AND ADJUSTING HINGE TENSIONING SCREWS
@2 FINAL CHECKLIST
@0 ATTACH BOTTOM KICKSTRIP
FRAMELESS CABINETRY
3 COMPONENTS LIST
4 MAXIMUM DISTANCE OF HOSE AND POWER CORD
5 PRODUCT AND CAVITY DIMENSIONS
6 CAVITY PREPARATIONS
7 CUSTOM DOOR PANEL DIMENSIONS
8 ATTACH SIDE TRIM BRACKETS
2 BEFORE INSTALLATION
1 SAFETY AND WARNINGS
ATTACH ANTI-TIP BRACKET
9
80” CAVITY
(2032 mm)
ATTACH ANTI-TIP BRACKET
ATTACH TOP TRIM
9
84” CAVITY
(2134 mm)
OR
RS36A80J and RS36A80U
models
To Next Page
Loading...
