Fisher & Paykel RS80A1 - Electrical and Plumbing Connections

Electrical connection should be located in an adjacent cabinet to either side oftheappliance or above
the appliance cavity. We recommend to use an isolating switch that is easily accessible to the user
aftertheappliance is installed.
WARNING!
z
Electrical shock hazard. Assume all parts are live.
z
Disconnect supply before servicing and installation.
ELECTRICAL AND PLUMBING CONNECTIONS
1 Recommended location for connections in adjacent area or unit
2 Alternative location for connections above the cavity
3 Alternative location for connections at rear of cavity
RS80 RS90
ELECTRICAL AND PLUMBING DIMENSIONS
MM MM
A Overall height of supply area 130 130
B Overall width of supply area 275 355
C Distance from left side of cavity 145 145
D Distance from the floor 72 72
Note: Dimensions are based on minimum depth of cavity.
!
Do not locate water or electricity in this area, keep clear of connections.
!
CAUTION: Central area can only fit water outlet and electrical plug if they are placed within a recessed cavity.
* In this location the water tap needs to be recessed into the wall, the recess must allow for an 80mm bend radius for the
watertube.
ELECTRICAL AND PLUMBING
!
Left side
of cavity
Floor
!
C b
A
Optional electrical
and water connection
location*
Electrical and water connections must be within this space if located
behind the appliance and must not protrude from the back wall.
100mm
100mm
d
1
1
3
2
17