20
USING YOUR ICE MAKER – ICE & WATER MODELS
TO ENSURE YOUR APPLIANCE OPERATES CORRECTLY PLEASE REFER TO THE
INSTALLATION INSTRUCTIONS BOOKLET SUPPLIED WITH THIS PRODUCT.
Ice On/Off
Your automatic ice maker is designed to dispense ice cubes into the ice storage bin
below until it senses the bin is full. If you require more ice, the storage bin can be
removed and ice will dispense into the top freezer bin.
Before you start using you automatic ice maker
When you first turn your refrigerator on after installation, the ice maker will be off.
To activate your automatic ice maker, press the ‘Ice On/Off’ button once. The LED
light above the button will illuminate indicating ice maker is on.
Press and hold , and together for 4seconds then close the doors. The ice tray
will flip twice and empty the water into the bin below. The ice tray will flip only after the
doors are closed.
Force another cycle, this step helps remove any manufacturing and transportation dust
in the ice tray.
Empty the water and correctly replace the bin, ensuring the scoop is located at the front
of the bin.
Once your ice maker is in operation, discard the first three harvests of ice (eight ice
cubes are produced per harvest). This will flush away any impurities in the water line
and ensure that you get the best quality ice. We recommend that you also do this after
vacations or extended periods of not using ice.
We recommend that you turn the ice maker off if:
– The water supply is going to be off for several hours,
– The ice storage bin is to be removed for a period of time,
– You are going on holiday/vacation.
To Next Page
Loading...
