- 14 -
4. Drum Door: Slides back along grooves in the bridge to provide access into the
drum.
5. Door Bracket: Secures and seals the drum in the closed position and houses
components for latching the door.
6. Hinge Arm: Part of the door assembly, which is contacted by the door grabber for
opening and closing the door. It also latches the door closed over the end of the
track.
7. Locking Bar: Attached to its ends are the hinge arms. Its function is to hold these
hinges in the correct orientation.
8. Hinge Spring: Springs the hinge arm down to ensure latching when the door is
closed.
There is also a Drum Door Scraper that prevents clothes from being drawn into the gap
between the drum and the door when the door is opening, and a Key Bracket that
prevents the door from closing when the clothes are protruding.
1
2
3
4
5
6
7
8
To Next Page
Loading...
