Drain Hose
Drain Hose Placement in a Stand Pipe or Tub
1. To guide the drain hose over the tub or standpipe
the hose guide must be fitted to the drain hose.
The height of the standpipe or tub should be
between 600 – 1000mm.
2. Secure the hose guide so it cannot become
dislodged from the standpipe or tub.
• If the drain hose is placed on
the ground or if the standpipe
or tub is less than 600mm
high, the washing machine
will continuously drain while
being filled (siphon).
• Regularly check that your
standpipe or tub is free from
lint or other obstructions,
which may affect how your
machine works or may cause
flooding.
Attaching Drain Hose to Spigot
1. Guide the drain hose through the hose guide.
2. Secure the hose guide to the back wall of
cupboard using a screw. The height of the drain
hose should be between 600 – 1000mm from
ground level.
Fitting the drain hose guide
https://producthelp.fisherpaykel.com/nz/Wash/Front_Loaders/WashSmart/WH1060P1/Installation_Guide_WH1060P1/07_Drai…
Updated: Mon, 10 Apr 2023 03:26:54 GMT
Powered by
1
To Next Page
Need help?
General
