Fisher & Paykel WH2424F Installation Instructions

7
INSTALLATION INSTRUCTIONS
Product dimensions
WH2424F
WH2424P
PRODUCT DIMENSIONS inches (mm)
A
Overall height of product 331/2” (850)
B
Overall width of product 235/8” (600)
C
Overall depth of product (including dial and door whenclosed) 255/8” (645)
D
Depth of door open 42” (1065)
E
Minimum door clearance to adjacent wall 13” (330)
Standpipe height min. 311/2” – 471/4”
(min. 800–1200)
CAPACITY
2.4 cu ft
Note: the exact height of your washer is dependent on how far the feet are extended
from the base of the machine. The space where you install your washer needs to be at
least 13/5” (40mm) wider and 3/4” (20mm) deeper than its dimensions.

Electrical supply: 2 wire plus ground, 120V, single phase, 60Hz, alternating current.

Inlet water static pressure: Max. (120psi), Min. 10psi.

Inlet water flow rate at faucet: Min. 11/2 gallons/min (6liters/min).
E
D
A
B
C
TOP VIEWWallFRONT VIEW
EN

Fisher & Paykel WH2424F Specifications

General

Brand	Fisher & Paykel
Model	WH2424F
Category	Washer
Language	English