Fisher & Paykel WH8560F - Page 13

13
WH1060J, WH9060J, WH8560J, WH8060J and WH7560J models
1
Power Press to turn the washer ON/OFF.
2
Keylock Press to disable all buttons on the control panel, except the
POWER button. This prevents accidental button presses.
3
SmartTouch™
Control Dial
Rotate to select your desired wash cycle.
z
Red LED illuminates to indicate the selected wash cycle.
4
Digital display
screen
Shows the following:
z
TIME TO GO – the remaining time in the cycle that is
currently running.
z
Delayed start time of wash cycle.
z
Notifications if an error is detected or a warning is necessary.
5
Progress lights Indicate the current status of the wash cycle.
z
All lights are illuminated at the start of the wash cycle.
z
The light of the current status flashes, and then turns off
oncecompleted.
6
Delay Start
Less/More
Press
MORE to increase andLESS to decrease the delay
start time.
7
Wash Temp Press to increase or decrease wash water temperature.
8
Spin Speed Press to increase or decrease spin speed.
9
Wash Boost Press to select PRE WASH or RINSE+.
!0
Options Press to select ECO.
!1
Start/Pause Press to start or pause the selected wash cycle.
CONTROL PANEL
1
2 64 7 8 9
5
!0
!1
3