Fisher & Paykel WH8560J1 - Disassembly Procedures

479646
18
7.2 Dis-assembly Procedure
7.2.1 Removal of Top Panel
1. Remove the 2 self-tapping screws securing
the top panel to the rear of the cabinet. Slide
the top panel toward the rear to clear the
side locators and then upwards to take off.
7.2.2 Removal of Rear Cover
1. Remove 4 self-tapping screws holding the rear
cover to the rear of the cabinet.
2. To remove the rear cover, slide it down and out
from the locating slots.
Reassemble in the reverse order.
Drain Pump
Tub to Pump Hose
Air chamber for
pressure sensor
Motor controller module
Heater
Front counter weights
Drain Hose
Tub