To Next PageTo Next Page
Need help?Do you have a question about the Fisher-Price BFB15 and is the answer not in the manual?
General| Category | Baby & Toddler Furniture |
|---|---|
| Type | Rocker |
| Manufacturer | Fisher-Price |
| Product Name | Fisher-Price Infant-to-Toddler Rocker |
| Power Source | Battery |
| Manufacturer recommended age | 0 - 2 years |
Lists potential hazards like fall, suffocation, and strangulation risks.
Check for damage, loose parts, or sharp edges before assembly and use.
Information regarding replacement warning labels in different languages.
Position frames with hub buttons facing out and align grooves with tabs on front base.
Fit rear base onto frame ends and push to snap; pull to ensure attachment.
Lift frames until each snaps into place, ensuring secure attachment.
Position seat ring wide side forward, fit pegs into frame holes at an angle.
Push the frame near a seat peg to snap the seat ring into place.
Fit caps onto frames, aligning wide/narrow tabs with frame notches, and push to snap.
Pull seat pad edge around the seat ring and fit button holes to pegs.
Insert and snap pad pegs into the holes in the front base.
Lift frames to open seat ring, then push down seat ring to secure.
Thread child's legs through pad holes and attach toys to seat loops.
Press button on each hub and lower the seat for storage.
Wipe frame with mild solution; avoid bleach and harsh cleaners.
Machine wash pad cold, gentle cycle; tumble dry low heat. Do not bleach.
Lift pad pegs from base and remove button holes from seat ring pegs.
