Battery Tips
Battery Replacement
• Locate the battery compartment
on the bottom of the toy.
• Loosen the screw in the battery
compartment door using a Phillips
screwdriver and remove the door.
• Insert three, new “AA” (LR6)
alkaline batteries as indicated inside the battery compartment.
Hint: We recommend using alkaline batteries for longer battery life.
• Replace the battery compartment door and tighten the screw with a Phillips
screwdriver. Do not over-tighten.
• When sounds or lights from this toy become faint or stop working, it’s time
for an adult to replace the batteries!
SHOWN ACTUAL SIZE
1.5V x 3
“AA” (LR6)
For best performance, we recommend you replace the batteries
that came in this toy with three, new, “AA” (LR6) alkaline batter-
ies upon purchase. For longer battery life, we recommend use of
alkaline batteries.
Battery Compartment Door
• Do not mix old and new batteries.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Remove the batteries during long periods of non-use. Always remove exhausted
batteries from the toy. Battery leakage and corrosion can damage this toy.
Dispose of batteries safely.
• Do not dispose of batteries in a fire. They may explode or leak.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as recommended in the “Battery
Replacement” instructions are to be used.
• If removable rechargeable batteries are used, they are only to be charged
under adult supervision.
• Rechargeable batteries are to be removed from the toy before they are charged.
• If you use a battery charger, it should be examined regularly for damage to the
cord, plug, enclosure and other parts. Do not use a damaged battery charger
until it has been properly repaired.
2
To Next Page
Loading...
