4195KA, KB, and KC Series
6–2
Key Description Part Number
21 Nozzle ass’y, SST 26A6904 X012
22 Washer, plastic (2 req’d) 16A9767 X012
23 Set pt beam ass’y, aluminum/SST 16A6939 X012
24* O–ring, nitrile
1 req’d for nozzle tubing ass’y (key 18)
1E2226 06992
1 req’d for nozzle ass’y (key 21)
1E2226 06992
25 Proportional band knob, polycarbonate 36A6911 X012
26 Retaining clip, S30200 (302 SST) 16A6913 X012
27 E–ring, SST 1V5929 X0012
28 Set pt beam bias spring, pl steel 16A6909 X012
29 Set pt beam shoe, G10100 (pl steel) 16A6910 X012
30 Machine screw, S18800 (18-8 SST)
Used w/key 29 (2 req’d) 19A1155 X022
31 Bellows bracket, A95052 (aluminum) 26A6932 X012
32 Bellows adj bracket, G10100 (pl steel) 16A6933 X012
33 Bellows adj spring, pl steel 16A6934 X012
34 Machine screw, fill hd, S18800 (18-8 SST)
Used to attach frame manifold (key 135) to
frame and for reset gain adjustment (2 req’d) 1B9925 X0012
35 Machine screw, hex hd, S18800 (18–8 SST)
Used to attach bellows bracket (key 31)
to each bellows ass’y (key 48) (2 req’d) 16A6935 X022
36 Proportional band indicator cover,
ABS w/polyester label 36A6936 X012
37 Self–tapping screw, S18800 (18–8 SST)
4 req’d to attach process scale (key 61)
to process scale bracket (key 376) 16A6938 X022
38 Self–tapping screw, S18800 (18–8 SST)
Used to attach frame inside case (9 req’d) 16A6959 X022
39 Supply gauge tubing ass’y
Copper/brass 16A6952 X012
SST 16A6952 X022
40 Proportional tubing ass’y
For 4195KA or KB Series
Copper/brass 28A0766 X012
SST 28A0766 X022
For 4195KC Series
Copper/brass 27A3217 X012
SST 27A3217 X022
41 Plug, S30300 (303 SST)
For all 4195KA and KBSeries (1 req’d) 1P2796 X0012
For 4195KC, KCM, KCE, and
KCME (2 req’d) 1P2796 X0012
For 4195KCF, KCFM, KCFE, and
KCFME (1 req’d) 1P2796 X0012
42 Reset valve tubing ass’y
For 4195KB Series w/o ext feedback
Copper 16A6949 X012
SST 16A6949 X022
43 Reset tubing ass’y
For all 4195KB Series
Copper 26A6950 X012
SST 26A6950 X022
For all 4195KC Series
Copper 28A0764 X012
SST 28A0764 X022
44 Relief valve tubing ass’y
For Types 4195KBF, KBFE, KBFM,
and KBFME only
Copper 16A6951 X012
SST 16A6951 X022
Key 46* Pressure Gauge
(1)
GAUGE MATERIAL
RANGE
Brass SST
Dual Scale Gauge
0 to 30 psig/
0 to 2 kg/cm
2
11B8577 X042 11B8583 X032
0 to 60 psig/
0 to 4 kg/cm
2
11B8577 X052 – – –
Triple Scale Gauge
0 to 30 psig/
0 to 200 kPa/
0 to 2 bar
11B8577 X012 11B8583 X012
0 to 60 psig/
0 to 400 kPa/
0 to 4 bar
11B8577 X022 11B8583 X022
1. One type of pressure gauge is used for both output pressure and supply pressure
indication.
Key Description Part Number
44 Relief valve tubing ass’y (cont’d)
For Types 4195KCF, KCFE, KCFM,
and KCFME only
Copper 18A0763 X012
SST 18A0763 X022
Note
One type of pressure gauge is used for both output
pressure and supply pressure indication.
46* Pressure gauge (2 req’d) See Key 46 table
48* Bellows ass’y (2 req’d)
Brass 16A6953 X012
SST 16A6953 X022
49 Bellows beam, A96061 (aluminum)
3 to 15 psig (0.2 to 1.0 bar) 16A6957 X012
6 to 30 psig (0.4 to 2.0 bar) 16A6958 X012
50 Relay ass’y
The part numbers listed for key 50 are for the complete relay
assembly only. Individual relay parts are listed in the Type 83U
Relay subsection of the parts list. Key numbers for individual relay
parts also appear in figure 5–29.
Relay, 3 to 15 psig (0.2 to 1.0 bar) 32B0257 X0A2
Relay, 6 to 30 psig (0.4 to 2.0 bar) 32B0257 X0B2
51 Relief valve cover plate, A03600 (aluminum)
2V5973 08012
52* O–ring, nitrile
Used w/key 51 (2 req’d)
1C8538 06992
53 Machine screw, fill hd, S18800 (18–8 SST)
Used w/key 51 (2 req’d)
1U8842 X0012
54 Reset restriction valve (4195KB Series only) 19A4361 X032
55 Differential relief valve
For all 4195KB and KC Series w/suffix
letter F, anti-reset windup 21A6447 X0A2
56 Process and set pt indicator ass’y w/sensing element
The part numbers in the Key 56 tables are for the complete pro-
cess and set pt indicator ass’y with a process sensing element.
Individual indicator ass’y parts are listed in two subsections of this
parts list: the Process and Set Point Indicator Assembly (key 56)
subsection and the Indicator Assembly (key 101) subsection. Key
numbers for individual indicator parts also appear in figures 5–25
and 5–26.
*Recommended spare parts
To Next Page
Loading...
