Operator‘s Manual FERITSCOPE
®
FMP30 Page 107
Measuring
7.7.2 Procedure For Making Measurements With the Free-Running Dis-
play Mode
The magnetic poles are subject to increased wear when moving the probe
across a surface.
Key sequ. /
Action
Detail of the display Explanation
Press the arrow key to enable the free-
running display mode.
will appear on the display.
[Appl:]: Number of the open Application
[Fe%]: Displays
-ferrite contents in ferrite
percent (measured variable of the open Ap-
plication 10.7.6 ‘Measured Variable’,
beginning on Page 180)
[Blck:]: Number of the block
[n= ]: Number of readings in the block
Place the probe on the specimen and move
it across the surface of the specimen to de-
termine the
-ferrite content distribution.
Lift the probe off the specimen.
Use to disable the free-running display
mode.
To Next Page
Loading...