Page 122 Operator‘s Manual FERITSCOPE
®
FMP30
Evaluation
Fig. 8-2 Printout of a long block result with tolerance limits enabled (example)
8.1.2 Printout of the List of Single Readings
Pressing the PRINT key during the block result display will also print a list
of the single readings in addition to the long or short block result. Shown
below are examples of printouts of readings with tolerance limits disabled
( Fig. 8-3) and with tolerance limits enabled ( Fig. 8-4):
Fig. 8-3 Printout of the single readings with tolerance limits disabled (example)
Displayed only when
tolerance limits are en-
abled
Application No. 0 Block No.: 3
n LSL USL
10.2% 10.8%
1| | * | | 10.4
2| | * | | 10.4
3| | * | | 10.4
4| | * | | 10.3
5|<<| | | 10.2
FISCHER FERITSCOPE FMP30 25.07.08
Appl.No. 0 -- Block result --
Block No.: 3 24.07.08 12:11
Mean value fe. = 10.33 +/- 0.13%
Std. dev. s = 0.10% n = 5
C. O. V. = 0.99%
lowest value = 10.17%
highest value = 10.42%
1 values < LSL ( 10.20% )= 20.00%
0 values > USL ( 10.80% )= 0.00%
Application No. 0 Block No.: 3
n= 1 fe = 10.4%
n= 2 fe = 10.4%
n= 3 fe = 10.4%
n= 4 fe = 10.3%
n= 5 fe = 10.2%
To Next Page
Loading...