Operator‘s Manual FERITSCOPE
®
FMP30 Page 9
Description of the Instrument
Both arrows together:
The displayed measurement was recognized as an outlier.
-8.8.8.8
Numeric elements for presenting readings, errors and
warning messages.
Unit of measurement for the displayed reading.
Battery:
The battery must be replaced or the rechargeable battery
must be charged because the voltage dropped below a
minimum value ( beginning on Page 22).
Hourglass:
Measurements are currently not possible because an in-
strument-internal routine is running.
Chain: Applications that have been set up using the same
probe are linked to each other, i.e., the same normaliza-
tion and/or corrective calibration is used for determining
the measurements for these Applications ( beginning
on Page 56).
Sheets: Matrix measuring mode is enabled ( beginning
on Page 112).
Key: Measurement block is closed.
...SCOPE ...
FKA...
Information lines:
Instrument type:
Instrument-internal software version
Display element Explanation
To Next Page
Loading...