Page 144 Operator‘s Manual FERITSCOPE
®
FMP30
Instrument Settings - Service Function Menu
10.2 System
10.2.1 Language
Measurement Audible signal
Measurement signal
Extern start
Measuring Mode - Standard/
Area Measurement/Auto Measurement
Unit
Measured variable
Air value acceptance
173
174
175
177
179
180
181
Storage mode store/do not store/delete at off 184
Master calibration Performing a master calibration 184
About ... Information about the instrument configura-
tion
185
Do not select a language for which you do not understand the characters,
e.g., Cyrillic! You might have difficulty returning to a language that is
familiar to you!
Key sequ. /
Action
Detail of the display Explanation
Select System from the service menu.
Use ENTER to confirm the selection.
ENTER
Select the Language by pressing the arrow
key
or and confirm the selection with
ENTER.
Service menu Functions
start on
Page
To Next Page
Loading...