Fisher FERITSCOPE FMP30 - Histogram

Operator‘s Manual FERITSCOPE
®
FMP30 Page 155
Instrument Settings - Service Function Menu
10.3.2 Histogram
A histogram can be presented as well when the final result is
displayed.( 8.2 ‘Evaluation of the Open Application “Final Result”’, be-
ginning on Page 124.) At least 30 readings are required for this. To dis-
play the histogram, proceed as follows:
Key sequ. /
Action
Detail of the display Explanation
Select Evaluation from the service menu.
Use ENTER to confirm the selection.
ENTER Select Histogram by pressing the arrow
keys
 or  and confirm the selection with
ENTER.
[off]: No histogram output when displaying
the final result.
[on]: Histogram output when displaying the
final result.
Use DEL at any time to cancel the setting
procedure.
For print settings of the histogram display proceed as described
under 10.5.5 ‘Histogram’, beginning on Page 164.