Page 12 Operator‘s Manual FERITSCOPE
®
FMP30
Description of the Instrument
BLOCK-RES
Retrieves the block result ( beginning on Page 118
Repeated pressing of BLOCK-RES:
Displays the individual components of the block result (mean
value, standard deviation, etc.) in succession.
.. and then
:
Ends the display of the block result (return to the measurement
screen) without closing the open measurement block (the current
measurement series can be continued).
.. and then
:
Displays the block result of the previous or following measure-
ment block of the open Application.
All block results of the open Application can be retrieved in suc-
cession through repeated pressing of
.
.. and then PRINT:
Prints the displayed block result.
.. and then MENU:
Displays the single readings of the evaluated measurement data
block (then all single readings can be displayed by pressing
or ). Pressing MENU again ends the single reading display.
.. and then DEL:
Deletes the readings of the last measurement data block that has
not been concluded and ends the display of the block result (re-
turn to the measurement screen).
.. and then ENTER:
Ends the display of the block results (return to the measurement
screen) and closes the current block. The next measurement
opens a new block.
ON/OFF
Turns the instrument on and off ( beginning on Page 28)
ZERO
Retrieves the normalization ( beginning on Page 61)
CAL
Retrieves the corrective calibration ( beginning on Page 64)
.. and then CAL:
Cancels the corrective calibration.
.. and then DEL:
Deletes the corrective calibration of the open Application.
Key Function
To Next Page
Loading...