Page 180 Operator‘s Manual FERITSCOPE
®
FMP30
Instrument Settings - Service Function Menu
10.7.6 Measured Variable
The menu option “Measured variable” appears only when the current Ap-
plication is set up.
Key sequ. /
Action
Detail of the display Explanation
Select Measurement by pressing the arrow
key
or and confirm the selection with
ENTER.
ENTER Select Measured variable by pressing the
arrow keys
or and confirm the section
with ENTER.
ENTER Select the measured variable of the open
Application by pressing the arrow keys
or
and confirm the selection with EN-
TER.
The settings of the measured variables of
the other Applications will not be affected.
The readings will be displayed on the
screen corresponding to the setting for the
measured variables ( 3.3.3 ‘Measured
Variables’, beginning on Page 32).
Use ENTER to confirm the selection.
Use DEL at any time to cancel the setting
procedure.
To Next Page
Loading...