Page 14 Operator‘s Manual FERITSCOPE
®
FMP30
Description of the Instrument
MENU Displaying and entering of the application-specific settings:
Tolerance Limits
Resolution
Block size
i individual values
Outlier
.. and then
or :
Selects the settings to be edited
.. and then PRINT:
Prints or displays a print form of the instrument configuration.
.. and then ENTER:
Confirms the selection of the setting to be edited.
.. and then DEL:
Exits the application-specific settings and returns to the measure-
ment screen.
PRINT Output of the values stored in the selected application (including
the block results) to a printer or transfer of these values to a con-
nected computer.
ENTER Confirms entries
5 x ENTER:
Calls the service functions
The instrument settings in the
Service Functions menu are pass-
word-protected. “157” will be displayed after pressing ENTER
5 times. Press
2 times to increase this value to the factory-de-
fault password “159” and confirm the entry with ENTER.
Key Function
To Next Page
Loading...