Lit. No. 85309, Rev. 03 11 July 15, 2020
OPERATIONAL TEST AND FINAL ADJUSTMENTS
PLUG COVERS
When the snowplow is removed from the vehicle,
install plug covers on the vehicle battery cable. Insert
the snowplow battery cable into the cable boot on the
snowplow.
OWNER'S MANUAL PACKET
If the completed snowplow will be delivered
immediately, the Owner's Manual should be reviewed
with and given to the purchaser.
If the snowplow is completed prior to delivery to the
purchaser, attach the Owner's Manual packet to the
electrical cable of the cab control for safekeeping.
CAUTION
Plug covers shall be used whenever
snowplow is disconnected. Vehicle battery
cable is 12V unfused source.
To Next Page
Loading...