Lit. No. 44224, Rev. 14 17 August 15, 2011
GETTING TO KNOW YOUR SNOWPLOW
Minute Mount
®
2 SYSTEM
The Minute Mount 2 system from Fisher
Engineering continues to set the industry
standard for detachable snowplow design. The
quickest and easiest mounting system available,
the Minute Mount 2 system is twice the mount
because it takes half the time. The Minute Mount 2
system should be installed according to the
instructions supplied. FISHER
®
outlets are
trained to perform this and other services for your
snowplow.
Most of the snowplow mount can now be removed
easily from the truck when it's not being used for
plowing. By removing the headgear, lift arm and
headlamps every time you remove the snowplow,
you eliminate over 100 lb of weight on the front
suspension and tires resulting in less wear all year
long! This also means improved appearance of
your four-wheel-drive or sport-utility vehicle.
Peculiar
Attachments
(pushplates)
Headgear
Insta-Act
®
Hydraulic Unit
Release
Handle
Lift Arm
A-Frame
Jack
Headlamps
To Next Page
Loading...