Fisher MT-750 - Page 9

CABINET & TURNTABLE PARTS LIST (continuea)
Ret.
Part
No.
Description
Q'ty
CA85 141 2 3519 69000 Angle Mount
CA86) «141 2 8519 33300 Spring, Lock Caset Case
CA87 =141 2 3169 23200 Frame
CA88 =141 2 3519 69100 Angle Mount
CA89 141 2 4459 33200 Cushion
CA90 «141 2 5289 01600 Rail
CA91 4 2319 77560 Leaf Switch (Return) [S3]
CA92 141 2 3169 22200 Guide Angle
CA93. 141 2 3519 72200 Angle Mount
CA94 141 2 125907401 —‘ Plate Bottom
CA95 4 5272 00180 Comutate MTR Magnet (Lifter) [M2]
CA96 §=131 2 4201 20300 Screw
CA97? =: 131 2 7104 00101 Plate Pad Switch
CA98 AX 4 2312 02650 Switch Slide (Voltage Select) [$5]
Sa er a es Cw NG
Cx1 101 3 1302 00311 Screw, Pan Hd., +M2.0x3
CX2 ~=—s- 101 3 1303 03011 Screw, Pan Hd., +M3.0x30
Cx3 103 3 1303 00511 Screw, Pan Hd. Tapping-2, +M3.0x5
CX4 103 3 1904 00611 Screw, Brazier Hd. Tapping-2, +M4.0x6
CX5 143 3 1702 00618 Screw, Bind Hd. Tapping-B, +M2.0x6
CX6 143 3.1702 00818 Screw, Bind Hd. Tapping-B, +M2.0x8
CX7 =—s- 112 3. 1302 00011 ~~ ERing, M2.0
CX8 110 3 2104 00011 Spring Washer-2, M4.0
CX9 = =106 3 1204 00311 Hex. Nut-2, M4.0
-—-3 43 po |SHNDO DP HS
PCB1 141 0 1939 05800 Control P.C.B. Assy
PCB2 141 0 193902710 PCRP.C.B. Assy
PCB3 141 0 1939 02721 PTRP.C.B. Assy
PCB4 141 0 1939 02731 LED P.C.B. Assy
PCB5 1414 0 1939 05471 —‘ Terminal P.C.B. Assy
PCB6 141 0 1939 05900 Sub Control P.C.B. Assy
PCB7 141 0 1939 06000 Touch Switch P.C.B. Assy
PCB8 141 0 1939 06100 Manual Switch P.C.B. Assy
PCB9 141 0 1939 06200 Slide Switch P.C.B. Assy
PCB10 141 0 1939 06300 Auto Function Jack P.C.B. Assy
PCB11 141 0 1939 06500 Power Supply P.C.B. Assy
—- oS oi ss
NOTE:
1. Parts order must contain Model Number, Part Number and
Description.
2. Ordering quantity of screws and resistors must be multiple of
10 pcs.
PRODUCT SAFETY NOTICE
Each precaution in this manual should be followed during servicing. Components identified with the IEC symbol A\ in the
Parts list and the schematic diagram designate components in which safety can be of special significance. When replac-
ing a component identified with A\ , use only the replacement parts designated, or parts with the same ratings of resis-
tance, wattage or voltage that are designated in the parts list in this manual.
Leakage-current or resistance measurements must be made to determine that exposed parts are acceptably insulated
from the supply circuit before returning the product to the customer.
-11-