Lit. No. 94196/94197/94198, Rev. 05 9 November 1, 2010
LOADING
This Manual covers vehicles which have been
recommended for carrying the hopper spreader.
Please see your local dealer for proper vehicle
applications.
MATERIAL WEIGHTS
Material
Density
(lb per cubic yd)
Fine Salt – Dry 1,350
Coarse Salt – Dry 1,215
Coarse Sand – Dry 2,700
Coarse Sand – Wet 3,240
Cinders 1,080
Load Volume
CERTIFICATION
WARNING
Overloading could result in an accident or
damage. Do not exceed GVWR or GAWR
as found on the driver-side cornerpost of
vehicle.
WARNING
New untitled vehicle installation of a spreader
requires National Highway Traffi c Safety
Administration altered vehicle certifi cation
labeling. Installer to verify that struck load of
snow or ice control material does not exceed
GVWR or GAWR rating label and complies
with FMVSS.
CAUTION
Read and adhere to manufacturer's ice
control package labeling including Material
Safety Data Sheet requirements.
37" (2.5 cu yd)
27" (1.8 cu yd) 27" (1.5 cu yd)
8' Unit 7' Unit
To Next Page
Loading...
