EasyManua.ls Logo

Fiskars Gifting Board - How to Make an Envelope; Prepare Envelope Paper; Score and Punch Envelope Lines; Assemble the Envelope

Fiskars Gifting Board
2 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Make an envelope
3. Rotate counter-clockwise 90 degrees. Align scored
line on paper over SCORE LINE 1. Punch notch.
Score along SCORE LINE 2.
4. Repeat step 3 twice. 5. Round all corners with punch. 6. Fold and secure wings with adhesive.
2. Place paper ush against raised ruler with end
beneath correct RULER POSITION (see printed
chart). Punch notch. Score along SCORE LINE 2.
2
2
1. Select CARD SIZE and check PAPER SIZE on
printed chart. Trim paper to size.
Make a bow
1. Select PAPER SIZE on printed chart’s BOW
GUIDE (black section). Trim paper to size.
3. Place paper ush against raised ruler with end
beneath RULER POSITION 1 (see printed chart).
Punch notch. Flip paper over and repeat.
4. Rotate paper 180 degrees and repeat step 3. 5. Place paper ush against raised ruler with end
beneath RULER POSITION 2 (see printed chart).
Punch notch. Flip paper over and repeat.
6. Bring notched intersections together to form a
bow and secure with adhesive.
2. Place end of paper strip beneath notch punch.
Center using dashed lines. Punch notch. Repeat
on other end.
*Certain-sized envelopes may result in overhanging tabs. To correct, simply use the included stylus to score, then trim excess paper as needed.