101
ELECTRIC BYCICLE COMPACT
EN
SETTINGS
• P01. Background lightness: 1 = dark, 2 = normal, 3 = lightest.
• P02. Distant unit: 0 = KM; 1 = MILE.
• P03. Battery Voltage: 24V, 36V, 48V (default 36V).
• P04. Sleeping time: 0 = unlimited, 1-60 = minutes.
• P05. PAS
- Level = 0. You can select 3 different levels.
- Level = 1. You can select 5 different levels.
• P06. Wheel diameter: unit = inch.
• P07. No of magnet steel for speed measurement: 1-100.
• P08. Speed limit: Range 0-50 km/h, 50 means no limit.
• P09. Setting for zero/none zero start: 0 =zero start, 1 = none zero start.
• P10. Powering Model settings:
- 0: PAS (throttle disabled, output power is corresponding to PAS levels).
- 1: Throttle (PAS disabled, output power is controlled by throttle turning, top speed it
corresponding to PAS level settings).
- 2: PAS & Throttle (In P9, the setting has to be 1).
• P11. PAS sensitivity: Range 1-24.
• P12. PAS starting intensity: Range 0-5.
• P13. Magnet steel model for PAS: 5, 8, 12 (three models).
• P14. Currency limit for controller : Range 1-20A , default 12A
BUTTONS
The buttons can be used with press or press and hold for 3 seconds for the function to be activated.
1. Press: to increase/decrease the PAS level to control the top speed. Press and hold
both buttons to enter/exit to settings.
2. Press: change between models in multi-functional area display. Press and hold to turn on
and off LCD display
3. Press and hold this button to change the unit for speed.
4. Press to turn on/off the Headlight. Press and hold to enter 6,5 Km/h cruise model while
the E-bike is stand still. While the E-bike is running, press and hold to enter the cruise model in
current speed. Press and hold to exit cruise model while it is in cruise model.
CHANGE SETTINGS
Press and hold both buttons to enter into settings:
Press to switch between settings, press to increase the figures and to decrease the
figures. Press to reserve the settings. While finish setting, just leave it for 10 sec, it will exit setting
models.
To Next Page
Loading...