110
STORAGE
ELECTRIC BICYCLE STORAGE
• Keep your bicycle in a dry location which is away from the weather and sun. Direct sunlight may
cause paint to fade or rubber and plastic parts to crack.
• Before storing your bicycle for a long period of time, clean and lubricate all components and wax
the frame.
• Deflate the tires to half pressure and hang the bicycle off the ground.
• Charge your batteries and make sure they are protected from water. Batteries should be charged
every 30 days to avoid capacity loss.
• Don’t cover the bicycle with plastic as “sweating” will result and it may cause rusting.
Please notice that your bicycle warranty does not cover paint damage, rust, corrosion, dry rot or theft.
HOW TO FOLD THE BIKE
1. Turn the key switch to the OFF position.
2. Unlock the handlebar quick release lever (A, Picture 1) and push down the handlebar to the
lowest position, then lock the handlebar quick release lever.
3. Unlock the handlebar quick release lever (A, Picture 2) and rollover the handle bar.
4. Rotate the pedal upward so it is perpendicular to the ground (A, Picture 3).
5. Release the lock lever from its clasp on the right side of the E-Bike (A, Picture 4).
6. Rotate the lock lever (A, Picture 4) clockwise until it points backwards pull the lock nut and
rotate the lock nut (A, Picture 4) out, away from the E-Bike until the nut clears the lock plate
(B, Picture 4).
7. Grasp the seat and the handlebar. Pivot the front half of the frame rearward around the hinge
until the front wheel is beside the rear wheel (Picture 5).
To Next Page
Loading...