Step 7: Insert the framework long straight tube into the liner,
making sure the holes for the pipe legs will line up with the
openings in the liner
Make sure the frame is not upside down during insertion. The push pins are for holding the tubing
together during install, but the holes of the straight tubes must be facing outward towards where the
legs will insert.
Step 8: Insert the framework long elbow tube into the liner
Attach a T-shaped top frame into the long elbow tube on which end you want the harness frame to
be attached.
THE IPOOL INSTRUCTION MANUAL
Pool Set-Up
Please carefully read this instruction manual
before installing and using the iPool
14
Figure 1: Upside tubing example
To Next Page
Loading...