Step 13: Attach the grey connectors to your inlet outlet ports from
outside the pool if they are provided
Step 14: Install the leg and connect with the harness
Connect the leg support U-shaped tube (#5) into the liner’s lower stretchable flap. Attach the legs
towards the outer end of the tube. Both tubes should be facing outwards (see figure below).
THE IPOOL INSTRUCTION MANUAL
Pool Set-Up
Please carefuy read is instruction manual
before instaing and using e iPl
17
Firmly attach the tube connections to the U-shaped tube. Assemble eachof the standing legs in the same
exact fashion.
To Next Page
Loading...
