5. To finish attaching the outer ladder, follow Illustrations 10, 11, and 12, making sure the correct types
of screws are used, as indicated.
THE IPOOL INSTRUCTION MANUAL
Ladder Set-Up
Please carefuy read is instruction manual
before instaing and using e iPl
25
Step 21: Continued
4. Following Illustration 8, take your partially finished inside ladder and attach to the outside ladder
frame by inserting it below the ladder handles. Insert the hexagon socket button head screw (#25)
and washer (#26) to hold it in place.
8
9
10 11 12
To Next Page
Loading...
