What to do if the sensor is not reading correctly on my Fitness Reality Elliptical Trainer?
If the sensor on your Fitness Reality Elliptical Trainer isn't reading correctly, open the left and right covers and realign the magnet sensor.
Why is the tension adjustment not working on my Fitness Reality AIR ELLIPTICAL?
If the tension adjustment on your Fitness Reality Elliptical Trainer isn't working, undo the buckle of the Clip and then pull the top strap on the front of the unit away (downward) to re-tighten the tension belt.
What to do if the pedal assembly is coming loose on my Fitness Reality Elliptical Trainer?
If the pedal assembly on your Fitness Reality Elliptical Trainer is coming loose: * Make sure the bolt is secured to the foot bar and into the crank with the nylon nut. * When tightening the bolt, make sure the bolt threads protrude out through the nylon nut. Proper tightness is extremely important to prevent parts from coming loose or damage during use.
General| Resistance | Air |
|---|---|
| Stride Length | 13 inches |
| Maximum User Weight | 250 lbs |
| Display | LCD |
| Heart Rate Monitoring | Yes |
| Resistance Type | Air |
| Heart Rate Monitor | Pulse sensors on handlebars |
| Dimensions | 51 L x 25 W x 64 H inches |
| Product Dimensions | 57.5 x 24 x 64 inches |
| Product Weight | 80.5 lbs |
| Display Functions | Time, speed, distance, calories, heart rate |
| Pedals | Non-slip |
| Warranty | 90 days parts |
Details on how to contact customer service for support, including email and phone.
Instructions for safely getting on and off the elliptical machine.
Specific warnings and cautions for Model 2310 regarding assembly and operation.
Key guidelines to minimize personal injury risks during use.
Steps for attaching the front stabilizer to the main frame.
Steps for attaching the rear stabilizer to the main frame.
Lubricating the rotation rod and attaching the handrails.
Instructions for installing the left and right foot bars.
Steps for lubricating, aligning, and installing the right crank bolt.
Steps for lubricating, aligning, and installing the left crank bolt.
Attaching the right and left foot pedals to the foot bars.
Attaching the right and left handrail arms to the main frame.
Installing the right and left U-shaped grab bars.
Connecting cables and mounting the handlebar support frame.
Connecting tension cable and securing bottle holder.
Mounting the hand pulse handlebar onto the support frame.
Installing seat cushion, sliding tube, and seat post.
Connecting the computer console and installing adjustable levelers.
Details on console specifications, using the computer, and mode button functions.
Step-by-step guide for installing batteries in the computer console.
How to increase or decrease resistance using the tension control knob.
Ensuring elliptical stability by adjusting rear stabilizer end caps and adjustable levelers.
Guidance on using grab bars for elliptical or exercise bike modes and body focus.
Instructions on how to safely move the elliptical using transport wheels.
Guidelines for cleaning, lubricating moving parts, and storing the elliptical.
Solutions for power issues, no console display, and squeaking/clicking noises.
Solutions for equipment instability, tension adjustment, and loose pedal assembly.
Details on warranty period, covered components, and common exclusions.
Information on how to order replacement parts, including required details.
To Next Page