4
FITT FORCE PRO - TEK - LITE
EN - Important safety and installation instructions. Please read and
follow all warnings and instructions before using this product. Injury
can result from improper use.
Thank you for your purchase of the Fitt Force
TM
Pro - Tek - Lite!
Installing your new hose is as easy as 1-2-3
Installation instructions for use:
Step 1: Locate the water supply outlet you would like to connect your hose to.
Step 2: Remove the Fitt Force
TM
Pro - Tek - Lite from the package and comple-
tely uncoil it starting with the male end.
Step 3: Attach the female end of the Fitt Force
TM
Pro - Tek - Lite to the water
supply outlet by screwing the connector clockwise until rmly seated.
Step 4: If using a nozzle with the Fitt Force
TM
Pro - Tek - Lite, attach it to the
male end of the hose at this time.
Step 5: Enjoy your new hose!
SAFETY WARNINGS
• Fitt Force
TM
Pro - Tek - Lite is intended for outdoor watering applications only
• Not for hot water use
• Do not leave under pressure when not in use
• Do not leave unattended children to use Fitt Force
TM
Pro - Tek - Lite
• Do not leave out on freezing temperatures
• Store indoors in winter
• For proper use, allow water to ush through the hose a few minutes before
drinking
• Coupling protection: to avoid any kind of corrosion causing fusion between
the faucet and the coupling on the hose, we suggest disconnecting and recon-
necting the hose from any metal spigot a minimum of 3 times per year.
• Optimum working pressure from 36 up to 120 psi (Fitt Force
TM
Pro)
• Optimum working pressure from 29 up to 100 psi (Fitt Force
TM
Tek)
• Optimum working pressure from 29 up to 85 psi (Fitt Force
TM
Lite)
• Bursting pressure 450 psi (Fitt Force
TM
Pro)
• Bursting pressure 300 psi (Fitt Force
TM
Tek)
• Bursting pressure 200 psi (Fitt Force
TM
Lite)
To Next Page
Loading...
