Flair 58 Plus - Flair 58+ Features and Care; Preheat System Management; Detachable Preheat Cable; Cleaning Your Flair 58+

Keep Your Flair in Tip Top Shape
Cleaning Your Flair 58+
+
+
1. Dissasemble and detach
locking hook, then use stem
to remove plunger
3. For more thorough
cleaning, place a cup
beneath your Flair 58
and ush with cool water
before wiping
2. Use damp cloth to wipe
the inside and bottom of
the brew head. Also wipe
the plunger
Before cleaning, always ensure that your Flair 58’s Preheat System is o, your brew head has
cooled and never immerse the brew head in water.
No Soap Needed!
Keep Outside
Surface &
Wires Dry!
See our online “Safety and Instructions Guide” via the QR code for more information.
Flair’s World-class customer service is a snap away
Troubleshoot Your Flair 58+
Reach Us Directly: https://airespresso.com/contact/
BREW WITH NO STRINGS ATTACHED
The Flair 58+ Detachable Preheat Cable
Your Flair 58+ can be preheated
then detached from the cable
for the ability to brew away from
any plugs. Simply locate the
textured arrows to unseat the
4-pin connector and brew “with
no strings attached.”
Once the PCB is disconnected,
cover the electrical components
of the brew cylinder with the
provided cap. The brew cylinder
can be preheated using water
just o the boil, with the valve
plunger lowered.
SIMPLE THERMAL MANAGEMENT FOR ANY ROAST
The Flair 58+ Preheat System
TURN ON - Press & hold button (3 sec) - LEFT light will BLINK - then...
TURN OFF - Press & hold button (3 sec) - ALL lights OFF
LOW ~85° C (185° F) MEDIUM ~90° C (194° F) HIGH ~95° C (203° F)
Left Light Turns
SOLID
(when Low Temp is
reached)
Wait A Few Minutes
(for preheat to complete)
ALL Lights SOLID
(when High Temp is
reached)
Wait A Few Minutes
(for preheat to complete)
Push Button 2 TIMES
(RIGHT light will BLINK)
LEFT & CENTER Lights
Turns SOLID
(Med Temp is reached)
Wait A Few Minutes
(for preheat to complete)
Push Button AGAIN
(CENTER light will BLINK)
The Flair 58’s Preheat Control System can preheat the brew
cylinder to three dierent temperatures: Low, Medium or
High, to correspond to dierent roast levels.
Please nd usage details for the Preheat Control System
below and full safety instructions in our online Safety
and Instructions Guide, which can be found online by
following the QR code on the front of this manual.