16
APPENDIX & TECHNICAL DETAILS
Technical details
Connections:
Ribbon cable adapter for Doepfer bus +/-12Volt
Inputs: 2x MIDI-TRS-B, 10x CV, 8x Trigger/Gate, 3,5mm mono/stereo jacks
Outputs: 1x MIDI-TRS-B, 8x audio, 3,5mm mono/stereo jacks
Controls:
12 buttons
8 Potentiometer, 1 encoder
1 LCD-graphic display
Resolution: DAC: 16Bit, Audio output: +/-5V
Current consumption: +210mA / -70mA
Size: Euro format 3U / 22HP 110x128,5x33mm, installation depth: 30mm
Expander: 3U / 6HP 110x30x20mm, installation depth: 25mm
Warrenty
Beginning from the date of purchase a 2-year warranty is guaranteed for this device in
case of any manufacturing errors or other functional deficiencies during runtime.
The warranty does not apply in case of:
- damage caused by misuse
- mechanical damage arising from careless treatment
(dropping, vigorous shaking, mishandling, etc)
- damage caused by liquids penetrating the device
- heat damage caused by overexposure to sunlight or heating
- electric damage caused by improper connecting
(wrong power supply/ jacks/ MIDI connections/ voltage problems).
If you have any complaints please contact your dealer or send an e-mail to:
service@flame-instruments.de
Terms of production
conformity: CE, RoHS, UL
Disposal
The device is produced with RoHS-conformity (subject to the regulations of the
European Union) and is free of hazardous substances (like mercury, plumb, cadmium
and hexavalent chrome). But electronical scrap is hazardous waste. Please don't add
this to consumer waste. For an environment friendly disposal of waste please contact
your distributor or specialist dealer.
Support
Updated and additional informations, updates, downloads and more see:
http://flame.fortschritt-musik.de
Acknowledgment
For help and assistance big thanks to: Sebastian Preller, Thomas Wagner, Felix
Bergleiter, Anne-Kathrin Metzler, Alex4 and Schneiders Büro Berlin.
To Previous Page
Loading...