EasyManua.ls Logo

Flavel Rocco HE FPHL RN2 Series User Manual

Flavel Rocco HE FPHL RN2 Series
42 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Rocco HE
Model No. FPHL**RN2
HIGH EFFICIENCY LOG EFFECT ROOM HEATER
Installation, Maintenance & User Instructions
Hand these instructions to the user
Model No. FPHL**RN2 is for use on Natural Gas (G20) at a supply pressure
of 20 mbar in G.B. / I.E.
** Denotes trim & colour variant
Question and Answer IconNeed help?

Do you have a question about the Flavel Rocco HE FPHL RN2 Series and is the answer not in the manual?

Flavel Rocco HE FPHL RN2 Series Specifications

General IconGeneral
ModelRocco HE FPHL RN2 Series
CategoryHeater
TypeGas Fire
Fuel TypeNatural Gas
IgnitionElectronic
Type of HeatRadiant & Convected
Control TypeManual

Summary

Section 1: Information & Requirements

1.0 Appliance Information

Details about the main injector, pilot type, heat input, and gas rate.

1.1 Conditions of Installation

Legal and regulatory requirements for proper installation of gas appliances.

1.2 Flue and Chimney Suitability

Specifications and requirements for compatible flue and chimney systems.

1.3 Shelf Position

Guidelines for safe placement of the fire below combustible shelves.

1.4 Hearths

Requirements for hearth specifications when installing the appliance.

1.5 Installation to Plastered Wall Surfaces

Specific procedures for mounting the appliance on plastered walls.

Section 2: Installation of Fire

2.1 Unpacking the Combustion Chamber

Instructions for safely unpacking the main firebox and its components.

2.2 Preparation of Combustion Chamber Opening (Studded Wall)

Steps for creating the opening in a studded wall for installation.

2.3 Preparation of Combustion Chamber Opening (Chimney Breast)

Steps for creating the opening in an existing chimney breast.

2.4 Securing the Fire to the Opening

Method for securely fixing the fire unit into the prepared opening.

2.5 Installation of the Gas Supply

Detailed guidance on connecting the gas supply pipework to the appliance.

2.6 Fitting of the Efficiency Baffle

Instructions on installing the baffle to improve appliance efficiency.

2.7 Fitting Unit Batteries

Steps for installing batteries into the main unit.

2.8 Removing / Re-fitting the Glass Frame Assembly

Procedures for safely removing and reinstalling the glass frame.

Section 3: Installation of Fire

3.1 Fitting the Fuel-Bed Logset

Guide to arranging the ceramic logs and gravel for a realistic fuel bed.

3.2 Making the Gas Connection & Checking for Gas Tightness

Procedures for connecting gas and performing a tightness test.

3.3 Removal & Re-fitting of the Trim Assembly

Instructions for removing and reattaching the decorative trim.

3.4 Fitting Control Valve Batteries

Steps for installing batteries into the fire's control valve unit.

3.5 Lighting the Fire Manually Via the Control Valve

How to operate the fire using the manual controls on the unit.

3.6 Lighting the Fire Via the Remote Control Handset

Step-by-step guide for igniting and operating the fire with the remote.

3.7 Checking for Clearance of Combustion Products

Method for testing proper exhaust of combustion gases for safety.

Section 4: Maintenance

Servicing Notes

Guidelines and requirements for annual professional servicing.

4.1 Removing the Burner Assembly from the Fire

Procedures for safely removing the burner unit from the fire.

4.2 Removing the Control Valve Sub Assembly from the Fire

Procedures for safely removing the control valve unit.

Parts Shortlist

A list of available spare parts for the appliance.

Section 5: User Instructions

5.1 Installation Information

General information relevant to the installation process for the user.

5.2 About Your New Rocco HE Room Heater

An overview of the product's features and design.

Important Safety Information

Critical safety warnings and precautions for using the appliance.

5.3 Spillage Monitoring System

Explanation of the safety feature that monitors flue performance.

5.4 Operating the Fire - Remote Control Models

Instructions for controlling the fire using the remote handset.

5.5 Manual Operation of Remote Control Models

How to operate the fire manually if the remote control is unavailable.

5.6 Replacing the Batteries on Remote Control Models

Step-by-step guide for replacing batteries in the remote handset.

5.7 Cleaning

General instructions for cleaning the appliance.

5.7.1 Cleaning the Trim and Painted Metal Parts

Specific guidance for cleaning the exterior trim and painted surfaces.

5.7.2 Cleaning the Fuel Bed

Instructions for cleaning the decorative logs and gravel.

5.7.3 Cleaning the Glass Panel

Method for cleaning the glass panel of the fire.

5.8 Removal & Re-fitting the Fuel-Bed Logset

Procedures for removing and reinstalling the fuel bed logs.

5.9 Removing / Re-fitting the Glass Frame Assembly

Steps for removing and reassembling the glass frame.

5.10 Removal & Re-fitting of the Trim Assembly

Instructions for detaching and reattaching the fire's trim.

5.11 User Replaceable Parts

Identification of parts that can be replaced by the user.