FILLING THE APPLIANCE WITH WATER
Remove the Water Reservoir from the appliance.
Remove the Lid and ll the Water Reservoir with
cold water up to the MAX indication line and put it
back on to the appliance.
We recommend ltered drinking water only.
A full reservoir allows you to make up to six 7 oz.
beverages.
Never pour anything other than cold water in to
the reservoir.
Switch the appliance on.
The 3 Indicator Lights will ash slowly while the water
is heating up (which will take about 90 seconds).
The appliance is ready for use when the 3 Indicator
Lights are lit continuously.
10
To Next Page
Loading...
