Flex BW 18.0-EC Original Operating Instructions

BW 18.0-EC
18
Attaching the reducing nozzles
WARNING!
Remove the battery before carrying out any
work on the power tool.
Mounting on the bayonet connection
 Attach the adaptor to the bayonet
connection by turning lightly in anti-
clockwise direction.
 Check that the adapter is securely
seated.
 Fit the relevant reducing nozzle.
Disassemble
 Remove in reverse order.
Mounting on the air inlet
 Fit the adapter on the air inlet.
 Fit the relevant reducing nozzle.
Disassemble
 Remove in reverse order.
Switching on and off
CAUTION!
- Never direct the nozzle of the power tool
at other persons or yourself.
- Use personal protective equipment:
safety goggles, ear defenders and also
a respirator (or breathing protection) if
dust is agitated during operation of the
power tool. It is also recommended to
wear suitable footwear, long trousers and
gloves while working with the power tool.
- Keep hair and clothing away from
openings and moving parts.
Brief operation without engaged switch
rocker
 Press and hold down theswitch.
 To switch off, release theswitch.
Continuous operation with engaged
switch rocker
 Press and hold down theswitch (1.).
 To lock into position, hold down
thelocking button (2.) and release
theswitch.

Flex BW 18.0-EC Specifications

General

Battery Voltage	18 V
Voltage	18 V
Housing Material	Plastic
Airflow speed	82 m/s
Max. air speed	82 m/s