Page 2
1) The transmitter is designed to accept any off-the-shelf Ni-MH rechargeable
batteries. When charging both transmitter and individual batteries at the same time the
priority always goes to the transmitter charging. The individual battery charging begins
only after the transmitter charging is completed. Depending on the battery capacity the
average charging time is approximately 3 hours from completely drained to fully charged.
Constant red on the LED represents charging in progress, constant green represents
batteries fully charged, and LED off represents no batteries detected. Please do not use
any rechargeable lithium ion batteries as it will damage both the transmitter and the
charging station.
2) For mobile application the optional rubber safety belt can be used to prevent
transmitter from dropping out of the charging station when the vehicle encounters bumpy
road condition (optional).
To Next Page
Loading...
Need help?
General