15
IW 1/2" 750 18.0-EC
or poorly maintained, the vibration emission
level over the total working period.
To make an accurate estimation of the
vibration exposure level, it is also necessary
to take into account the times when the tool
use.
level over the total working period.
Identify additional safety measures to
vibration such as: maintain the tool and the
cutting accessories, keep the hands warm,
organization of work patterns.
CAUTION!
Wear ear defenders at a sound pressure
above 85 dB(A).
Technical data
Tool IW 1/2” 750 18.0-EC
Type Impact Wrench
Rated voltage Vdc 18
No-load
speed
r.p.m
0-500/0-1300/
0-2300
Max. impact
rate
bpm 2800
Max torque N 750
Weight
according
to”EPTA
Procedure
01/2003”
(without
battery)
kg
1.9
Battery
18V
AP 18.0/2.5
AP 18.0/5.0
AP 18.0/8.0
Weight of
battery
kg
AP 18.0/2.5
AP 18.0/5.0
AP 18.0/8.0
0.4
0.7
1.1
Working
temperature
-10~40℃
Storage
temperature
< 50℃
Charging
temperature
4~40℃
Charger CA 10.8/18.0, CA 18.0-LD
Overview (see gure A)
The numbering of the product features refers
to the illustration of the machine on the
graphics page.
1 1/2” Square drive
2 Variable-speed trigger switch
3 Speed control panel
4 LED light
5 Direction preselector switch (forward /
center-lock /reverse)
6 Strap xing
For attaching a wrist strap (not included)
in order to reduce the chances of
dropping your tool.
7 Belt clip
8 Opening
9 Fastening screw
Operating instructions
WARNING!
Remove the battery before carrying out any
work on the power tool.
Before switching on the power
tool
Unpack the cordless impact wrench and
check that here are no missing or damaged
parts.
NOTE
The batteries are not fully charged on
delivery. Prior to initial operation, charge the
batteries fully. Refer to the charger operating
manual.
Inserting/replacing the battery
Press the charged battery into the power
To remove, press the release button and
To Next Page
Loading...
