Flex IW 1/2" 750 18.0-EC - Page 17

17
IW 1/2" 750 18.0-EC
󰀲
Reverse: bolt removal mode; the tool stops
automatically as soon as it has loosened the
bolt/nut.
To select the “A” mode:
󰀲
check the active mode:
Either depress and release the trigger switch
or press the drive-control button or the “A”
button directly without touching the trigger
switch.
The LED indicator beside the “A” button will
illuminate to indicate the current mode setting.
See more details in chart below:
Forward Rotation
LED indicator displayed
on panel
Working
Mode
Application
1 Fine-tuned tightening of small bolts and nuts.
2 When tightening, the torque is moderate.
3 When tightening, the torque is maximum.
A Tightening with automatic stop.
Reverse Rotation
LED indicator displayed
on panel
Working
Mode
Application
1 Fine-tuned loosening of small bolts and nuts.
2 When loosening, the torque is moderate.
3 When loosening, the torque is maximum.
A Loosening with automatic stop.
ON OFF