03 04
Step 5:Install the handle
Step 3:Install the desktop
Connect the desk frame (2) to the desktop(1) with screws (C), and tighten it with a pistol drill.
First buckle the four lids(8) into the beam of the desk frame (2) and then into the protective cover (3).
Step 4:Install the protective cover and lids
This product cannot be disposed of as household waste. To prevent damage to the
environment, this product should be recycled. Please use the relevant recycling
systems available to you or contract the distributor or manufacturer for recycling
assistance.
Recycling and Disposal
ATENTION
Insert the handle (7) into the right support plate (6) and adjust the height clockwise.
Fixed card slot.
To Next Page
Loading...