Flintec EM100-C User Manual

EM100-F User Manual
0084293
Page 92 of 93
6.4.5. SDO Abort Codes
Abort Code (Hex.)
Description
05030000
Toggle Bit not alternated.
05040000
SDO Protocol timed out.
05040001
Client server command specifier not valid.
05040005
Out of memory.
06010000
Unsupported access to an object.
06010001
Attempt to read a write only object.
06010002
Attempt to write to a read only object.
06020000
Object does not exist in the object dictionary.
06040043
General parameter compatibility.
06040047
General internal compatibility in the device.
06060000
Access failed due to a hardware error.
06070010
Data type does not match. Length of service parameter does not match.
06070012
Data type does not match. Service parameter too long.
06070013
Data type does not match. Service parameter too short.
06090011
Sub-Index does not exist.
06090030
Out of range parameter (write access only).
06090031
Value of parameter is too high.
06090032
Value of parameter is too low.
06090036
Maximum value is less than the minimum.
08000000
General error.
08000020
Data cannot be transferred or stored to the application.

Flintec EM100-C Specifications

General

Brand	Flintec
Model	EM100-C
Category	Control Unit
Language	English