FLIR Ariel CM-3102 - Page 84

Accessing the CM-3102 via a Web Browser
76
Ariel CM-3102 User and Installation Guide
December 12, 2018
Note:
The Encoding Priority setting is displayed only when H.264 is selected.
In the Stream2 section, configure the following settings:
From the Resolution drop-down list, select:
For PAL systems: 1280x720 (HD 720p), 720x576 (D1), or Off. The default is
1280x720.
For NTSC systems: 1280x720 (HD 720p), 720x480 (D1), or Off. The default is
1280x720.
Note:
The video standard (PAL or NTSC) can be changed from the TV Format drop-down
list on the Configuration > Basic Operations screen. See section 6.3.1.2.4 (page
41).
From the Compression drop-down list, select H.264 or MJPEG according to the required
image quality and storage limitations. The default is H.264.
Configure the remaining settings as in the Stream1 section above.
Note:
When using H.264 for Stream2, the default bit rate is 1382 bits per second.
In the Stream3 section, configure the following settings:
From the Resolution drop-down list, select:
For PAL systems: 720x576 (D1)
For NTSC systems: 720x480 (D1)
Note:
The video standard (PAL or NTSC) can be changed from the TV Format drop-down
list on the Configuration > Basic Operations screen. See section 6.3.1.2.4 (page
41).
From the Compression drop-down list, select H.264 or MJPEG according to the required
image quality and storage limitations. The default is H.264.
Configure the remaining settings as in the Stream1 section above.
Note:
When using H.264 for Stream3, the default bit rate is 750 bits per second.
Click Save.