ADVANCED SETTINGS MENU
Press OK to open the Main Menu, scroll to the Advanced Settings
icon
, and press OK. Scroll to an icon, shown below, and press
OK to activate.
Press OK to enable/disable the MAX-MIN-AVG mode.
Press OK to enable/disable PEAK MAX and PEAK MIN mode.
(RELATIVE) Press OK to store a reading as a reference with
which to compare subsequent measurements.
Press OK to start/stop the Data Logger. Open the Gallery
from the main menu to access data log files.
MULTIMETER MEASUREMENTS
The last section of this Quick Start provides examples of multimeter
electrical test setups. Refer to the detailed user manual (link in the
customer support section, below) for complete instructions.
METERLiNK DATA TRANSFER
Download the METERLiNK application for iOS and Android devices
to begin transferring images, video, and data log files from the me-
ter to mobile devices. Refer to the comprehensive DM286 user
manual, and the separate METERLiNK user manual, for complete
information. User Manuals are available on the support site (see
Customer Support section, below).
Limited 10-Year Warranty
This product is protected by FLIR’s Limited 10-Year Warranty. Visit
www.flir.com/testwarranty to read the Limited 10-Year Warranty
document.
Customer Support
Customer Support Telephone List:
https://support.flir.com/contact
Repair, Technical Support, Registration, & Document downloads:
https://support.flir.com
#NAS100145; r. AB/90267/90278; en-GB
9
To Next Page
Loading...
