FLIR Duo Pro R - Scene Presets

FLIR Duo Pro R User Guide
Duo Pro R User Guide, Rev. 1.0
Information on this page is subject to change without notice
21
Figure 10. Scene Presets
5.1.2.1 Scene Presets
The Duo Pro R camera includes the following Scene presets:
1. Linear
2. Default
3. SeaOrSky
4. Outdoor
5. Indoor
6. Custom1
7. Custom2
Scene Algorithms have been tuned for each preset. Each option has its own set of image parameters.
When switching between Scene settings, the camera requires roughly two seconds to load. If unsure
which setting to use, select Default.
5.1.2.2 Region of Interest (ROI)
The Region Of Interest (ROI) slider allows the user to set a region of interest (a rectangular area of
pixels on the sensor array) that the Scene algorithm will use for its calculations. This rectangular
area can be configured so that varying amounts of sky will be excluded. When set to 100, the full
field of view will affect the image. A setting of 50 will exclude the top half of the image.