Duo Pro R User Guide, Rev. 1.0
Information on this page is subject to change without notice
5.2.1.3 Radiometry
Provides access to the Radiometry tab where users can configure all the temperature
measurement functions and settings available on the Duo Pro R. See FLIR’s UAS Radiometry
Tech Note (see Section 2.2 for the link) for a detailed discussion on how to obtain accurate
temperature readings for UAS applications.
Figure 14. Radiometric Settings
• Temperature Unit: Units of measure displayed on the analog video stream. Select between
Celsius and Fahrenheit.
• Temperature Range: This setting adjusts the camera sensitivity and dynamic range to
provide optimum image quality. Detectable temperature ranges are as follows:
o -25/+135°C (-13/+275°F)
o -40/+550°C (-40/+1022°F)
Temperature measurements outside these ranges will be unreliable, and the pixels detecting
those temperatures may saturate.
To Next Page
Loading...
