FLIR Duo Pro R - Figure 22. Camera Tab

FLIR Duo Pro R User Guide
Duo Pro R User Guide, Rev. 1.0
Information on this page is subject to change without notice
36
Figure 22. Camera Tab
Camera Connectivity
• Scan for Camera: Prevents the Bluetooth interface from shutting off after 2 minutes by
keeping the APP running on the handset.
• Persistent Bluetooth: Prevents the Bluetooth interface from shutting off after 2 minutes by
keeping the APP running on the handset.
• Bluetooth Power: Adjusts the Bluetooth transmitter power and affects the maximum range
at which the Duo Pro R camera can connect to the mobile device. Power values are expressed
in percent.
• Turn Off Camera Bluetooth: Powers down the Bluetooth radio on the camera. The camera
will normally disable the Bluetooth after two minutes of inactivity (unless Persistent
Bluetooth is enabled).
About
• Serial Number – Duo Pro R camera serial number currently connected to the app.
• Part Number – FLIR part number of the Duo Pro R camera currently connected to the app.
• Firmware Version – Version of firmware currently loaded in the Duo Pro R camera.