Duo Pro R User Guide, Rev. 1.0
Information on this page is subject to change without notice
Figure 25. Firmware Upgrade Prompts
6. Reconnect via Bluetooth. Once rebooted, reconnect your handset to the camera by
selecting ‘Yes’ from the Bluetooth Disconnect dialogue. The camera should reconnect and
present you with the Main screen. If you previously selected ‘No’ in this dialogue you will
need to force quit and restart the APP on your handset.
7. Restore User Settings. From your notes in Step 1 reconfigure any custom settings that have
been reset to factory default. You can also delete the firmware update file from your microSD
card.
To Next Page
Loading...
