FLIR Duo Pro R - Unpacking Your Camera

FLIR Duo Pro R User Guide
Duo Pro R User Guide, Rev. 1.0
Information on this page is subject to change without notice
8
3.1 UNPACKING YOUR CAMERA
FLIR Duo Pro R includes the following components:
3.1.1 FLIR Duo Pro R Camera
Figure 1. Duo Pro R
3.1.2 Bench Cable
The Bench Cable connects to the Duo Pro R via the 10-pin accessory port, and is designed for
benchtop testing prior to installing the camera on an airframe. The cable comprises an XT60
connector for power, an analog video RCA connector, and three servo-style connectors for PWM
signals.